HOME > SUPPORT > FAQ > About Tyre Pyrolysis > Biodiesel Feasibility Analysis Report

Biodiesel Feasibility Analysis Report

Prospects biodiesel
First, China 's oil consumption
    According to Chinese official statistics, in 2003 China's oil consumption totaled 267 million tons , annual output of 170 million tons of domestic and imported oil and nearly 100 million . This year, China 's oil consumption will increase to 300 million tons , about 120 million tons of oil imports , accounting for the world 's total oil exports 4-5% . The IEA forecasts show that in 2010 China's oil consumption may be about 350 million tons , 180 million tons of domestic production , imported from abroad need 50% ; 2020 , Chinese oil demand is estimated minimum of 4.5 million tons, domestic production quite sure that is 180 million tons , the need to import 270 million tons , 60% of foreign dependence ; if 2030 to 2040 , then continued economic growth , the International Energy agency predicts that China's crude oil output of 100 million tons would be able to rest , you need to import as much as 500 million tons , which means that foreign dependence will reach 87%.
Second, the characteristics of biodiesel
    1 has excellent environmental characteristics . Bio-diesel with low sulfur content , can reduce emissions of sulfur dioxide and sulfur by about 30% . Biodiesel does not contain an aromatic hydrocarbon pollution to the environment . Compared with ordinary diesel , biodiesel is environmentally -friendly features, its diesel exhaust emissions of toxic organic compounds is only 1/ 10 , particulate matter of 20%, CO2 and CO emissions by only 10%. To meet its emission targets in Europe No. Ⅱ and Ⅲ emission standards ;
    (2) has a good engine cold start performance ;
    3 has good lubricating properties, to reduce fuel pump , the engine block and rod wear rate and prolong its service life ;
    4 have better safety performance, and its high flash point, is not classified as dangerous goods ;
    5 good fuel performance , its high cetane number , the combustion performance is better than ordinary diesel ;
    6 with renewable . Biodiesel as a renewable energy source , and its resources are not depleted.
Third, the production of biodiesel
    The main raw material for biodiesel production is abandoned edible oils and fats , which comes from the following places :
    1 . Generated during cooking and frying foods frying oils , such as McDonald's, KFC and other foreign brands of fast food frying oil produced , as well as our traditional foods such as fried fritters , instant noodles and biscuits processing waste generated during frying oil ;
    2 . Baked goods produced during animal fats , such as roast duck, roast lamb process from animal fats in baked ;
    3 . Animal products produced during the normal processing of the treated waste resulting animal fats , such as using waste and other waste stewed pig oil ;
   4 . Catering waste oil , also known as swill oil , mainly referring to the leftovers from the oil-water separation obtained through grease ;
   5 . Waste oil, mainly refers to the dishwashing process the oil into the sewer .
According to expert calculations , the amount of waste oil edible oil consumption accounts for about 20% -30 % . China's average annual consumption of edible oil in an amount of 21 million tons total , the waste oil generated annually 400-700 million tons. Able to gather together as a resource of 400 million tons of waste oil , plus acidification oil , China annually produce 500 tons of biodiesel . If each county to build a national bio- refineries , require annual processing capacity of 2,500 tons of plant can be processed .
                                 New technology and new equipment
First, the country's first new production process methods
   1 , the composite thermal catalytic cracking catalyst formulation of new technology, the greatly increased yield of biodiesel . This new production process not only ensures the yield of biodiesel , and this new production process is simple .
   2 , this new preparation process for biodiesel , compared with the prevalence of the use of domestic low-carbon alcohols ( eg : methanol ) , esterification and transesterification to produce biodiesel , has a great advantage :
     a, without pre- processing of raw materials ( such as : dehydration, go to miscellaneous other processes ) , so not only can reduce the initial investment in equipment , but also reduces the cost of the production process .
    b, the new production process in the production process does not require adding carbon alcohols , only a small amount of catalyst , thus greatly saving the cost of chemicals .
    c, the entire production process simply by adding 4% methanol as a deacidification agent , there is no methanol recovery equipment investment, can greatly reduce the customer's initial investment .
    d. This new method to determine the production process , raw pyrolysis of biodiesel and only a small portion of organic carbon Tel 0374-7699826 13523740423
Two . JJ - X series of new equipment
1 . The composition of the device
   a. Rotary Catalytic Cracking processor
   b. Cooling System
   c. Electronic control system
   d. Automatic slag and safety systems
   e. Environmental Systems
   f. Burn-back exhaust system
2 . The unique system of several large
   a. Catalytic pyrolysis reactor
        Using a horizontal 360 degree rotating structure , rotations per minute 0.4 turn , can make the whole kettle body heat, increases heated area to improve the raw materials , the cracking rate .
   b. Slag system
        Current domestic production reactor, because it is a fixed structure , so the slag slow, dirty slag and other unfavorable factors . The rotary autoclave unique design of its interior , resorted to slag achieve a fully automatic , with the slag fast, clean, slag and other advantages .
   c. Environmental Systems
        Dust: I designed the wet and dry flue dust S-shaped dust barrier system , dust removal rate of 95 % or more, black smoke does not completely solve the environmental problems. Dust by wet and dry dust chamber dust barrier chamber to remove the S-shaped smoke, emissions standards , the use of induced draft fan device , so the chimney can be buried in .
        Waste : After oil and gas out of the remaining part of the solid powder can be used as organic fertilizer raw materials ---- .
        Water : the entire production process, only the condenser and cooler water , while it is cooling effect , can be recycled, and only a small amount of wastewater in the solution .
    d. Burn-back exhaust system
    In the production process , there are some on the ambient temperature and pressure of the combustible gas can not be liquefied , such as direct emissions can cause air pollution. My company has independently developed stainless steel exhaust cyclone burners, a very effective solution to this problem , the exhaust gas through the seal and tempered blocker two safety devices, in the bottom through the burner combustion , one can prevent air pollution on the other hand can save a lot of fuel .
     e. Free distillation refining system
       The pyrolysis reactor biodiesel out colors and smells and GB diesel there are some differences , through my company this set free after distillation refining system in light yellow color , the smell has been largely removed. This system relative to the cost of equipment on the market today purified by distillation or vacuum distillation system is the system of its equipment cost of 1 /4.
Third, the production process for biodiesel
Gun seal materials
            → → reactor condenser vacuum bag → → → Free distillation refining oil tank system →
Catalyst ↓
               Flue gas cooler
                   Dust emissions environmental chamber →

Related TAG: tires to oil, Carbon black, tyre pyrolysis oil, tire oil, tyre furnace oil, price tyre oil, tire oil distillation equipment, tire derived fuel oil, argan oil,
Back To Home:http://www.pyrolysisoil.net
上一篇:Carbon Black and tire oil extraction from rubber tires Feasibility Analysis Report 下一篇:Coal tar refining refining diesel continuous automation of new technologies