HOME > INDUSTRY INSIGHTS > RESEM News > RESEM new-type waste tire pyrolysis plant acquire market shares all over the world

RESEM new-type waste tire pyrolysis plant acquire market shares all over the world

RESEM new-type waste tire pyrolysis plant features
1.    100% waste tyre recycling is achieved (No churn left after the process)
2.    No chemical ingredients are used in process (environment friendly)
3.    During and after the process there is no soil, water or air pollution.
4.    Creates economically valuable products out of waste.
5.    The most cost-effective waste tyre recycling technology in the world.
6.    Raw material (waste tyre) is cheap and easy to procure.
7.    Each recycled ton of tyres preserves 10 tons of CO2, a major greenhouse gas.
8.    The process can be applied to all rubber based materials.
9.    The system creates an alternate source of energy to replace petroleum Products and natural gas.
10.  System gives the opportunity to governments and local administrations to deal with the wastage tyre problem to a great extent.

 
The end products of RESEM new-type waste tire pyrolysis plant
The process of Pyrolysis has duration of 4 to 12 hours, depending on the quantity and size of tyre (car tyre, truck tyre, etc.). During the process different vacuum values are applied in pre-determined temperatures and in different phases. Different gases are obtained and the condensed gas is stored as a fuel oil in tanks.
 
40% to 45% Oil yield
The oil product is well within the range of that of a fuel oil refined from crude oil. The main oil produced by recycling application is fuel oil which is widely used for industrial and commercial purposes. The oil is 40% to 45% of the amount of recycled scrap tyres.
 
30%to 40% Char and Carbon Black
A solid product termed tire-derived char or tire-derived carbon char is produced. The solid product can be further processed to enhance specific characteristics and to meet specifications for carbon black, or can be marketed directly. Carbon black produced by Pyrolysis process (CBp) is more economical compared to carbon black produced primarily from petroleum and is more price efficient to be used as an ingredient in the industries listed.


8%to 12% Gas
Non-Condensable gases arise during the pyrolysis process. The pyrolysis gas has the features as follow:
lt has higher calorific value as compared to natural gas.
It can be replaced where natural gas and propane are stored.
The high energy gas is utilized as a source of energy for the Pyrolysis process. .Considering 10 ton scrap tyre/day recycling capacity, the facility would generates 1000 -1200 m3/day gas, which has an enormous energy potential when evaluated
 
10%to 12% Steel
Steel scrap extracted is considered a fairly clean scrap iron ready to be marketed. Valuable steel wires are pressed and sold to steel and scrap dealers.

Related TAG: Pyrolysis Oil, new-type waste tire pyrolysis plant,
Back To Home:http://www.pyrolysisoil.net
Source:http://www.pyrolysisoil.net/INDUSTRY_INSIGHTS/RESEM_News/RESEM_new_type_waste_tire_pyrolysis_plant_acquire_market_shares_all_over_the_world_148.html
上一篇:RESEM establish large scale pyrolysis plants on turnkey basis 下一篇:India customer visit RESEM group for waste plastics pyrolysis plant

Related Reports: